Sage EDM International, INC. 

Home | Products | Technical Support | Dealers/Agents | Company Info | Contact Us | Request for Info

Industrial Supplies

TPV vulcanization, Dynaprene® VE

GENERAL PURPOSE

Property

 Unit Typical Value Method
VE0055A VE0064A VE0073A VE0080A VE0087A ASTM
Moisture % 0.03 0.03 0.03 0.03 0.03 NANTEX
Hardness Shore A
(5 sec)		 55 64 73 80 87 D2240
Specific Gravity @23°C   0.96 0.96 0.96 0.95 0.95 D792
Tensile Strength* psi 650 910 1100 1480 1950 D412
Ultimate Elongation* % 390 410 480 500 540 D412
Stress at 100%

Elongation*

 psi 210 330 420 570 740 D412
Weight Gain
(24hrs, @121°C, IRM903)		 % 80 79 77 65 52 D471
Compression Set, 25% deflection
(22hrs,@100°C,)		 % 27 30 37 40 53 D395B
Tensile Set
(100% strain)		 % 7 11 13 17 25 D412
Tear Strength*
(die C,@23°C)		 pli 100 160 190 250 350 D624
Brittle Point °C < -60 < -60 < -60 < -60 < -57 D746
Note
  1. The above test values could be different among laboratories, subject to sampling plan or test method.
  2. These properties are tested by NANTEX laboratory and only for reference.
  3. * Properties are measured in the cross direction, injection molded plaques.
  4. Other hardness products such as VE0035A, VE0045A, VE0040D and VE0050D are available.

 

MOLDING GRADES

Property

 Unit Typical Value Method
VE1055A VE1064A VE1073A VE1080A VE1087A ASTM
Moisture % 0.03 0.03 0.03 0.03 0.03 NANTEX
Hardness Shore A
(5 sec)		 55 64 73 80 87 D2240
Specific Gravity @23°C   0.95 0.95 0.95 0.95 0.95 D792
Tensile Strength* psi 510 590 830 1050 1400 D412
Ultimate Elongation* % 300 310 380 420 310 D412
Stress at 100% Elongation* psi 210 270 348 480 710 D412
Weight Gain (24hrs, @121°C, IRM903) % 55 51 45 44 39 D471
Compression Set, 25% deflection
(22hrs,@100°C,)		 % 30 36 39 44 50 D395B
Note

  1. The above test values could be different among laboratories, subject to sampling plan or test method.

  2. These properties are tested by NANTEX laboratory and only for reference.

  3. * Properties are measured in the cross direction, injection molded plaques.

 

UV  GRADES

Property

 Unit Typical Value Method
VE2155A VE2164A VE2173A ASTM
Moisture % 0.03 0.03 0.03 NANTEX
Hardness Shore A
(5 sec)		 55 64 73 D2240
Specific Gravity @23°C   0.96 0.97 0.97 D792
Tensile Strength* psi 600 800 1000 D412
Ultimate

Elongation*

 % 380 400 470 D412
Stress at 100% Elongation* psi 210 300 350 D412
Weight Gain (24hrs, @121°C, IRM903) % 80 79 78 D471
Compression Set, 25% deflection
(22hrs,@100°C,)		 % 27 29 35 D395B
Tensile Set (100% strain) % 7 11 13 D412
Tear Strength* (die C,@23°C) pli 100 160 210 D624
Brittle Point °C < -60 < -60 < -60 D746
Note

  1. The above test values could be different among laboratories, subject to sampling plan or test method.

  2. These properties are tested by NANTEX laboratory and only for reference.

  3. * Properties are measured in the cross direction, injection molded plaques.

 

FR  GRADES

Property

 Unit Typical Value Method
VE3060A VE3070A VE3080A VE3090A ASTM
Moisture % 0.03 0.03 0.03 0.03 NANTEX
Hardness Shore A
(5 sec)		 60 70 80 90 D2240
Specific Gravity @23°C   1.30 1.30 1.30

1.30

 D792
Tensile Strength* psi 520 690 940 1100 D412
Ultimate Elongation* % 410 420 390 410 D412
Stress at 100% Elongation* psi 210 280 420 610 D412
Compression Set, 25% deflection
(22hrs,@100°C,)		 % 33 35 37 45 D395B
Tear Strength* (die C,@23°C) pli 110 150 210 260 D624
Flammability PIDS, 3.0mm
(UL94 V-0)		   V-0 V-0 V-0 V-0 D746
Note

  1. The above test values could be different among laboratories, subject to sampling plan or test method.

  2. These properties are tested by NANTEX laboratory and only for reference.

  3. * Properties are measured in the cross direction, injection molded plaques.

 

FDA  GRADES

Property

 Unit Typical Value Method
VE5064A VE5073A VE5080A VE5087A ASTM
Moisture % 0.03 0.03 0.03 0.03 NANTEX
Hardness Shore A
(5 sec)		 64 73 80 87 D2240
Specific Gravity @23°C   0.96 0.96 0.95 0.95 D792
Tensile Strength* psi 910 1100 1450 1800 D412
Ultimate Elongation* % 410 460 490 540 D412
Stress at 100% Elongation* psi 330 420 570 740 D412
Weight Gain (24hrs, @121°C, IRM903) % 79 77 65 52 D471
Compression Set, 25% deflection
(22hrs,@100°C,)		 % 30 37 40 46 D395B
Tensile Set (100% strain) % 11 13 17 25 D412
Tear Strength* (die C,@23°C) pli 160 190 250 350 D624
Brittle Point °C < -60 < -60 < -60 < -57 D746
Note

  1. The above test values could be different among laboratories, subject to sampling plan or test method.

  2. These properties are tested by NANTEX laboratory and only for reference.

  3. * Properties are measured in the cross direction, injection molded plaques.

 

Back to Industrial Supplies

 
Sage EDM International, INC.  

 [ Previous page ]
Mobile phone  886-930-086-831     mail me!     Line me with app! 

Maintaining by Ching-Liu Studio